Brickworks > API documentation > bw_wah

bw_wah

Description

Wah effect.

This is a simple digital effect, not an emulation of any analog circuit.

Info

Module type: dsp

Version: 1.1.0

Requires:

API

bw_wah_coeffs

typedef struct bw_wah_coeffs bw_wah_coeffs;

Coefficients and related.

bw_wah_state

typedef struct bw_wah_state bw_wah_state;

Internal state and related.

bw_wah_init()

static inline void bw_wah_init(
	bw_wah_coeffs * BW_RESTRICT coeffs);

Initializes input parameter values in coeffs.

bw_wah_set_sample_rate()

static inline void bw_wah_set_sample_rate(
	bw_wah_coeffs * BW_RESTRICT coeffs,
	float                       sample_rate);

Sets the sample_rate (Hz) value in coeffs.

bw_wah_reset_coeffs()

static inline void bw_wah_reset_coeffs(
	bw_wah_coeffs * BW_RESTRICT coeffs);

Resets coefficients in coeffs to assume their target values.

bw_wah_reset_state()

static inline float bw_wah_reset_state(
	const bw_wah_coeffs * BW_RESTRICT coeffs,
	bw_wah_state * BW_RESTRICT        state,
	float                             x_0);

Resets the given state to its initial values using the given coeffs and the initial input value x_0.

Returns the corresponding initial output value.

bw_wah_reset_state_multi()

static inline void bw_wah_reset_state_multi(
	const bw_wah_coeffs * BW_RESTRICT              coeffs,
	bw_wah_state * BW_RESTRICT const * BW_RESTRICT state,
	const float *                                  x_0,
	float *                                        y_0,
	size_t                                         n_channels);

Resets each of the n_channels states to its initial values using the given coeffs and the corresponding initial input value in the x_0 array.

The corresponding initial output values are written into the y_0 array, if not BW_NULL.

bw_wah_update_coeffs_ctrl()

static inline void bw_wah_update_coeffs_ctrl(
	bw_wah_coeffs * BW_RESTRICT coeffs);

Triggers control-rate update of coefficients in coeffs.

bw_wah_update_coeffs_audio()

static inline void bw_wah_update_coeffs_audio(
	bw_wah_coeffs * BW_RESTRICT coeffs);

Triggers audio-rate update of coefficients in coeffs.

bw_wah_process1()

static inline float bw_wah_process1(
	const bw_wah_coeffs * BW_RESTRICT coeffs,
	bw_wah_state * BW_RESTRICT        state,
	float                             x);

Processes one input sample x using coeffs, while using and updating state. Returns the corresponding output sample.

bw_wah_process()

static inline void bw_wah_process(
	bw_wah_coeffs * BW_RESTRICT coeffs,
	bw_wah_state * BW_RESTRICT  state,
	const float *               x,
	float *                     y,
	size_t                      n_samples);

Processes the first n_samples of the input buffer x and fills the first n_samples of the output buffer y, while using and updating both coeffs and state (control and audio rate).

bw_wah_process_multi()

static inline void bw_wah_process_multi(
	bw_wah_coeffs * BW_RESTRICT                    coeffs,
	bw_wah_state * BW_RESTRICT const * BW_RESTRICT state,
	const float * const *                          x,
	float * const *                                y,
	size_t                                         n_channels,
	size_t                                         n_samples);

Processes the first n_samples of the n_channels input buffers x and fills the first n_samples of the n_channels output buffers y, while using and updating both the common coeffs and each of the n_channels states (control and audio rate).

bw_wah_set_wah()

static inline void bw_wah_set_wah(
	bw_wah_coeffs * BW_RESTRICT coeffs,
	float                       value);

Sets the wah pedal position to the given value.

Valid range: [0.f (low cutoff), 1.f (high cutoff)].

Default value: 0.5f.

bw_wah_coeffs_is_valid()

static inline char bw_wah_coeffs_is_valid(
	const bw_wah_coeffs * BW_RESTRICT coeffs);

Tries to determine whether coeffs is valid and returns non-0 if it seems to be the case and 0 if it is certainly not. False positives are possible, false negatives are not.

coeffs must at least point to a readable memory block of size greater than or equal to that of bw_wah_coeffs.

bw_wah_state_is_valid()

static inline char bw_wah_state_is_valid(
	const bw_wah_coeffs * BW_RESTRICT coeffs,
	const bw_wah_state * BW_RESTRICT  state);

Tries to determine whether state is valid and returns non-0 if it seems to be the case and 0 if it is certainly not. False positives are possible, false negatives are not.

If coeffs is not BW_NULL extra cross-checks might be performed (state is supposed to be associated to coeffs).

state must at least point to a readable memory block of size greater than or equal to that of bw_wah_state.

C++ wrapper

Brickworks::Wah
template<size_t N_CHANNELS>
class Wah {
public:
	Wah();

	void setSampleRate(
		float sampleRate);

	void reset(
		float               x0 = 0.f,
		float * BW_RESTRICT y0 = nullptr);

#ifndef BW_CXX_NO_ARRAY
	void reset(
		float                                       x0,
		std::array<float, N_CHANNELS> * BW_RESTRICT y0);
#endif

	void reset(
		const float * x0,
		float *       y0 = nullptr);

#ifndef BW_CXX_NO_ARRAY
	void reset(
		std::array<float, N_CHANNELS>               x0,
		std::array<float, N_CHANNELS> * BW_RESTRICT y0 = nullptr);
#endif

	void process(
		const float * const * x,
		float * const *       y,
		size_t                nSamples);

#ifndef BW_CXX_NO_ARRAY
	void process(
		std::array<const float *, N_CHANNELS> x,
		std::array<float *, N_CHANNELS>       y,
		size_t                                nSamples);
#endif

	void setWah(
		float value);
...
}

ChangeLog